Film Splice Tape 19mm x 66m - Blue

PET 50µm, Silicone Adhesive

Technotape

Free shipping

Available for backorder

Film Splice Tape 19mm x 66m - Blue

Special tapes for a wide range of manual applications including film repair, manual film splicing in minilab operations and process detection purposes.

Description

All Film Tapes are coated with a pressure sensitive adhesive. Altough the initial tack (stickiness) is quite high, sufficient pressure should still be applied to ensure optimum adhesion.

This tape are also release coated. This means the rear side of the tape (non-adhesive side) has undergone a special non-stick treatment to ensure trouble free tape unwinding off the roll. The SST range of Splicing Tapes offers guaranteed trouble free and 100% clean removal each and every time and under the most critical conditions. The AST range offers a high adhesion and is a more economical alternative to SST. Adhesives used are Silicone, Acrylic and Rubber compounds. Base materials can be either polyester, polypropylene or PVC and in ticknesses from 25 to 50 microns (1 to 2 mill).

Colours can be very important and range from clear or coloured transparant, black (IR blocking) and yellow to silver metallic. Widths range from 12 to 50 mm and lengths from 33 to 66 m. Two standard core sizes are used, 1" and 3".

Specifications

Storage conditions:
Temperature: 15 - 25 (C) / 59 - 77 (F)
Humidity: 40 - 70% RH
Blue
19mm x 66m

Other remarks/considerations

Surfaces to be spliced should be clean and dust-free for optimum effect. Customised rolls are possible, subject to minimum order. For example: special sizes or personal printing in the cores.